Twin piston pouring machine
The machine is intended for pouring PU compounds using two separately operated heads.
SA standard delivery consists of piston pumps with the dose extent 5 – 35 ml and with a fixed mixing ratio 100:25 (possibility of delivery with different parameters)
RThe machine frame is provided with traversing wheels and with adjusting screws. Component bins, dosing piston pumps, an electric switchboard and a revolving arm are located thereon. From the revolving arm, the material is fed through heated up hoses having the length of 5 m into the heads. The carrier of hoses and heads is not component part of the machine.
MANUAL OPERATION - The function of the heads is controlled from the switchboard panel
AUTOMATIC OPERATION - The function is controlled by means of external in and outlets.
Pressure component bins
- one-jacket, galvanized
- polyol 120 litres, isocyanate 60 litres, rinsing agent 22 litres
- (possibility of delivering other ones)
- flow filters for intercepting impurities behind the outlet cocks
- removable bin covers
- continuous level scanning
- with all bins, reduction valve with manometer, safety valve and cocks for inlet and
- compressed air releasing
- common molecular compressed air drier
- with the polyol bin, material agitator with electric drive
Low-pressure mixing head
- lightweight construction of duralumin
- the mixing operation is ensured by a lamella agitator driven by a pneumatically operated motor
- agitator revolutions metering by means of an induction scanner
- inlet for liquid rinsing and for dry compressed air blowing through
- two separately operated heads
Component dosing pumps
- twin plunger pumps with pneumatic drive
- one pump for each head
- electronic metering of the stroke length
- before entering the pump, the components are filtered
- firmly set ratio (according to the pumps delivered)
- checking of the pumps function through the components off-take on the pump outlet.
Control panel
- control of the electric motor of the polyol bin agitator
- switching on/off of the pneumatic motors of the mixing heads
- control of spray-off, pouring, rinsing and blowing through for each head
- switching over of automatic and manual machine operation
- regulation and display of the hose temperature
- display of the component levels height
- LCD touch-sensitive display screen for setting, control and monitoring of the machine state
Touch-sensitive LCD colour display screen
- setting of the required pouring dose for each head (ml)
- counters of operating hours
- setting of speeds and times of the agitator runing cycling in the polyol bin
- reporting „WASHING NEEDED“,when material remains for a longer time in the head than set
- possibility of avoiding changes of important technological parameters using a password
- operating reports (drop and minimum of levels, drop of compressed air...)
- fault reports (fault of circuit breaker, converter...)
Technical parameters
Suitable accesories for machine
- Air Drier Freezing – for totally dry air in press containers
- Heating and cooling agregate – cool or heat of material in double tube (duplicated) containers
- Cleaning PU – liquid cleaner hot for removing the PU material from metal elements
- Containers for cleaning – suitable for use with cleaning PU
- Scale – for calibration of machine and check of products quality
Photogallery
Catalog CZ
Catalog EN